SPECIFICATIONS
Wavelength Range | 190.0~1100.0nm |
Display Wavelength | 0.1nm step |
Selectable Wavelength | 0.1nm step (1 nm step in spectrum mode) |
Scan Speed | Wavelength change: approximately 3800nm/min. Scan: approximately 24~1400nm/min |
Light source change | Selectable from the following 3 types: Auto change with wavelength Selectable wavelength: 295nm~364nm: 1nm interval Recommended wavelength : 340nm Halogen lamp only Deuterium (D2) lamp only |
Measurement method | Single beam measurement |
Light Source | Auto correction with the computer memory 20W Halogen lamp (long-life 2000 hours) Deuterium lamp ( socket type) Auto adjustment for maximum sensitivity |
Monochromator | Incorporates aberration-correcting concave blazed holographic grating |
Detector | Silicon photodiode |
Spectrum Bandwith | 5nm |
Wavelength Accuracy | + 1.0nm |
Wavelength repeatability | + 0.3nm |
Stray Light | Less than 0.05% (220.0nm Nal, 340.0nm NaNO2 & UV39) |
Photometric Range | Absorbance: -0.3~3.0 Abs Transmittance: 0.0~200% |
Recording Range | Absorbance: -3.99~3.99 Abs Transmittance: -399~399% |
Photometric accuracy | + 0.005 Abs (at 1.0 Abs) + 0.003 Abs (at 0.5 Abs) |
Photometric repeatability | + 0.002 Abs (at 1.0 Abs) |
Drift | less than + 0.001Abs/h (after 2hr warm up) |
Baseline Flatness | + 0.010 Abs (after 1 hr warm-up, at 1100~200nm |
Noise | less than 0.002 Abs, Peak to Peak less than 0.0005Abs. RMS |
Sample Compartment | Interior dimensions W110.0xD230.0xH105.0nm (Partial Depth: 155.0nm) 2-screw port for optional accessory installation |
Display | 6-inch LCD (320 x 240 dot) with CFD lighting with contrast adjustment |
Power Supply | 100~120V 50/60Hz 160VA 220~240V 50/60Hz 160VA |
Dimensions | W416 x D379 x H274nm |
Weight | 11kg |
Ambient Temperature | 15~35C |
Ambient Humidity | 45~80%, less than 70% if over 30C |